
S10 Bonding Primer
EcoRend S10 Bonding Primer is a silicone resin based primer, specifically designed for use on masonry substrates. The fine particle size polymers within the product ensure deep penetration into the substrate, creating ultra high adhesion, whilst the silicone resin ensures that the primer matches the breathability of its subsequent topcoats.
Pack Size: 5L/25L Coverage: Approx. 5m² per litre
Colours:



Highly Vapour Permeable



High Adhesion


Roller, Brush or Spray Application



Ready to Use


MR2 Monocouche Fibre Plus Render
MR2 Monocouche Fibre Plus Render is a fibre reinforced, cement based, through coloured scratch finish render. Fibre reinforcement has been added to the product in order to take some of the risk out of poor substrates and provide an anti crack finish. The product has also been developed to have excellent water repellence, breathability and adhesion and is also easy to apply, by hand or spray, in one coat. The products through colour characteristics ensure a low maintenance, attractive, stone looking finish.
Pack Size: 25kg Coverage: Approx. 1.5kg per mm / per m²
Colours:
To view our full palette of 33 beautifully designed colours, please click here.


Fibre Reinforced


Water Repellent



Breathable



High Adhesion


Ecorend QS1 Quick Set Monocouche Accelerator
Ecorend QS1 Quick Set is a liquid accelerator solution for Monocouche through-coloured render systems to speed up the time to scrape during colder application periods.
It directly replaces a proportion of the product gauging water and, if added at the correct dose, it will achieve a 20°C scrape time when working at 5°C. The accelerator is colourless and has no effect on the appearance of the finished product.
Pack Size: 20 litre Coverage: Refer to Technical Data Sheet for Dosage Instructions
Colours:






Easy to Mix


Use in Cold Weather



Supplied Ready to Use



Breathable